AXIOM5050M rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 1(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXIOM5050M rev.: 1 date: 2014-06-20 oscillator type: low phase noise ocxo with multiple outputs parameter min. typ. max. unit condition 96.000,mnbnbbn, frequency range 50 150 mhz frequency stability initial tolerance @ +25c 300 ppb @ v c = 5.0 v vs. operating temperature range option 2 & 3 see tables 1 & 2 steady state vs. supply voltage variation (pushing) 10 ppb v s 5% vs. load change (pulling) 5 ppb r l 5% long term (aging) per day 1 2 ppb after 30 days operation long term (aging) 1 st year 100 200 ppb after 30 days operation frequency adjustment range electronic frequency control (efc) 1 2 pp m efc voltage v c 0 5.0 10.0 v efc slope ( ? f / ? v c ) positive efc input impedance 100 k? rf output rf output ports (note 2) 2, 4, 6 option 1 signal waveform sine wave load r l 50 ? 5% output level (each port) +5 dbm (note 3) isolation between rf ports 30 db harmonics -30 dbc spurious -90 dbc warm-up time @ +25c 3 5 min ? f final /f 0 < 0.1 ppm phase noise consult factory supply voltage v s (note 4) 11.4 12.0 12.6 v current consumption (steady state) 300 ma @ +25c current consumption (warm-up) 500 ma enclosure (see drawing) (lxwxh) 50.0x50.0x21.0 max. mm weight 60 g packing palette notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. odd number of ports on request 3. higher output level on request. unused ports must b e terminated with 50 4. other supply voltage on request absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd control voltage v c -0.5 15 v v c to gnd storage temperature -55 +125 c
AXIOM5050M rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 2(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg frequency stability vs. temperature stability lower temperature upper temperature option 2 [ppb] option 3 t [c] option 3 t [c] 05 5 0 0 a +50 10 10 1 -10 b +60 25 25 2 -20 c +70 50 50 3 -30 d +75 100 100 4 -40 e +80 200 200 5 -55 f +85 table 1 table 2 standard: 1b = -10c to +60c frequency stability [option 2] temperature range [c] 05 10 25 50 100 200 0 ~ +50 o x x x x x -10 ~ +60 o x x x x x -20 ~ +70 o x x x x x -30 ~ +70 o o x x x x -40 ~ +75 - o x x x x -40 ~ +85 - - o x x x -55 ~ +85 - - o x x x table 3 availability x = available, o = available on request, - not available ordering code model option 1 [output ports] option 2 [stability] option 3 [temperature range] revision frequency [mhz] AXIOM5050M 2, 4, 6 table 1 table 2 rev.1 100.000 example: AXIOM5050M-6-25-1b_rev.1 C 100.000 mhz handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs- compliant yes no
AXIOM5050M rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 3(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections: pin # symbol function 1 v s supply voltage 2 gnd ground 3 v c control voltage (efc) sma (6x) rf out rf outputs ports sma connectors * 2 sma s3 C s4 4 sma s2 C s5 6 sma s1 C s6 *unused connectors are not present * see application note axan - 011
AXIOM5050M rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 4(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d0 20.06.2014 first issue hh hh
|
